Cisco Systems OL-7029-01 Credentials probe submode, Credentials username password, No credentials

Chapter 2 Content Switching Module with SSL Commands

credentials (probe submode)

credentials (probe submode)

To configure basic authentication values for an HTTP probe, use the credentials command in the SLB HTTP probe configuration submode. To remove the credentials configuration, use the no form of this command.

credentials username [password]

	no credentials
Syntax Description	username	Name that appears in the HTTP header.
	password	(Optional) Password that appears in the HTTP header.
Defaults	This command has no default settings.
Command Modes	SLB HTTP probe configuration submode
Command History	Release	Modification
	CSM release 1.1(1)	This command was introduced.
	CSM-S release 1.1(1)	This command was introduced.
Usage Guidelines	This command is for HTTP probes.
Examples	This example shows how to configure authentication for an HTTP probe:
	Cat6k-2(config-slb-probe-http)# credentials seamless abercrombie
	probe
Related Commands
	show module csm probe

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01 2-57