Chapter 2 Content Switching Module with SSL Commands

inservice (virtual server submode)

inservice (virtual server submode)

 

 

To enable the virtual server for load balancing, use the inservice command in the SLB virtual server

 

 

configuration submode. To remove the virtual server from service, use the no form of this command.

 

 

inservice

 

 

 

no inservice

 

 

 

 

Syntax Description

 

This command has no keywords or arguments.

 

 

 

Defaults

 

The virtual server is not in service.

 

 

 

Command Modes

 

SLB virtual server configuration submode

 

 

 

 

Command History

 

Release

Modification

 

 

 

 

 

 

CSM release 1.1(1)

This command was introduced.

 

 

 

 

 

 

CSM-S release 1.1(1)

This command was introduced.

 

 

 

 

 

 

 

Examples

 

This example shows how to enable a virtual server for load balancing:

 

 

Cat6k-2(config-slb-vserver)# inservice

 

 

advertise (virtual server submode)

Related Commands

 

 

 

show module csm vserver redirect

 

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

2-168

OL-7029-01

Page 190
Image 190
Cisco Systems OL-7029-01 manual Inservice virtual server submode, Virtual server is not in service, 168