Cisco Systems OL-7029-01 Snmp-server enable, Defaults Command Modes Command History Examples

Chapter 3 Commands Specific to the Content Switching Module with SSL

snmp-server enable

snmp-server enable

To configure the SNMP traps and informs, use the snmp-server enable command. Use the no form of this command to disable SNMP traps and informs.

snmp-server enable {informs traps {ipsec isakmp snmp {ssl-proxy [cert-expiring][oper-status]}}}

no snmp-server enable {informs traps {ipsec isakmp snmp {ssl-proxy [cert-expiring][oper-status]}}}

Syntax Description	informs	Enables SNMP informs.
	traps	Enables SNMP traps.
	ipsec	Enables IPSec traps.
	isakmp	Enables ISAKMP traps.
	snmp	Enables SNMP traps.
	ssl-proxy	Enables SNMP SSL proxy notification traps.
	cert-expiring	(Optional) Enables SSL proxy certificate-expiring notification traps.
	oper-status	(Optional) Enables SSL proxy operation-status notification traps.

Defaults

Command Modes

Command History

Examples

This command has no default setting.

Global configuration

Release	Modification
SSL Services Module	Support for this command was introduced on the Catalyst 6500 series
Release 2.1(1)	switches.
CSM-S release 1.1(1)	This command was introduced.

This example shows how to enable SNMP informs:

ssl-proxy (config)# snmp-server enable informs

ssl-proxy (config)#

This example shows how to enable SSL-proxy traps:

ssl-proxy (config)# snmp-server enable traps ssl-proxy

ssl-proxy (config)#

This example shows how to enable SSL-proxy notification traps:

ssl-proxy (config)# snmp-server enable traps ssl-proxy cert-expiring oper-status

ssl-proxy (config)#

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

3-48 OL-7029-01