Cisco Systems OL-7029-01 manual Script file, No script file

Chapter 2 Content Switching Module with SSL Commands

script file

script file

To load scripts from a script file to the CSM, use the script file command. To remove the script file command from the configuration, use the no form of this command.

script file {file-url bootflash: const_nvram: disk0: flash: ftp: null: nvram: rcp: slot0: sup-bootflash: sup-microcode: sup-slot0: system: tftp:}

	no script file
Syntax Description	file-url	Sets the location of the script file to a URL.
	bootflash:	Sets the standard Cisco IOS file name, such as
		bootflash:webprobe.tcl.
	const_nvram:	Sets the location of the script file to the switch NVRAM.
	disk0:	Sets the location of the script file on the CSM hard disk.
	flash:	Sets the location of the script file to the CSM flash memory.
	ftp:	Sets the location of the script file to an FTP location.
	null:	Sets the location of the script file to NULL.
	nvram:	Sets the location of the script file to the NVRAM.
	rcp:	Sets the location of the script file to the switch.
	slot0:	Sets the location of the script file to the switch.
	sup-bootflash:	Sets the location of the script file to the switch supervisor engine
		bootflash.
	sup-microcode:	Sets the location of the script file to the switch supervisor engine
		microcode.
	sup-slot0:	Sets the location of the script file to the switch supervisor engine.
	system:	Sets the location of the script file to the switch.
	tftp:	Sets the location of the script file to a TFTP location.
Defaults	This command has no default settings.
Command Modes	Module CSM configuration submode
Command History	Release	Modification
	CSM release 3.1(1)	This command was introduced.
Usage Guidelines	The file URL is a standard Cisco IOS file name such as bootflash:webprobe.tcl.

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01 2-93