Cisco Systems OL-7029-01 manual Vserver, 162

Chapter 2 Content Switching Module with SSL Commands

vserver

vserver

Syntax Description

Defaults

Command Modes

Command History

Examples

Related Commands

To identify a virtual server, and then enter the virtual server configuration submode, use the vserver command. To remove a virtual server from the configuration, use the no form of this command.

vserver virtserver-name

no vserver virtserver-name

virtserver-name	Character string used to identify the virtual server; the character
	string is limited to 15 characters.

This command has no default settings.

Module CSM configuration submode

ReleaseModification

CSM release 1.1(1) This command was introduced.

This example shows how to identify a virtual server named PUBLIC_HTTP and change the CLI to virtual server configuration mode:

Cat6k-2(config-module-csm)# vserver PUBLIC_HTTP

redirect-vserver

show module csm vserver redirect

	Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
2-162	OL-7029-01