Aiphone IS 1 , 2 , 3 , 4 , 5

26

Transferring to another master station

You can transfer a call received from a sub station to another

master station while communicating with it (communication

transferring), as well as setting calls to be automatically

transferred in the "INITIAL SETTING".

For a call from another master station, you can transfer it

*

when you are communicating with it. However, you cannot

transfer the communication to a remote site.

■ Communication transferring

Receive a call and communicate with it. (→P. 21)

1

Press

2 TRANSFER .

Press

3 to select the master station in your site

to which you want to transfer the call (so that it is

highlighted) from the list.

Press

4 TALK or ZOOM/WIDE .

While transferring, a sound rings at the source station to

*

indicate a transfer.

Press

5 OFF to enable the communication between

the station that called you and the transfer target

station.

NOTE:

You cannot transfer a call from a remote site to another remote site.

■ Call transferring

You can transfer a call to the designated master station (in your

site or a remote site) or the telephone registered to the system

automatically (without answering it) by the "TRANSFER"

settings in the "INITIAL SETTING". (→P. 19)

This function is useful when you are absent or you cannot

*

receive and answer a call.

When transferring to a remote site, a master station in the

*

remote site should have been registered as the pilot station

of the site.

The following settings can be made.

1 Transferring a call to the designated master station or

remote site automatically (→P. 19 [CALL TRANSFER],

[TRANSFER DESTINA])

2 Setting the delay time of triggering transferring after a call is

received (→P. 19 [TRANSFER DELAY])

3 Setting a schedule for call transferring in the System setting

on a PC (→P. 19 [SCHEDULE TRANSFER], [SCHEDULE

DESTINA])

4 Transferring a call to telephone automatically (→P. 20

[TELEPHONE TRANSFER], [SCHEDULE TEL TRANSFE])

* When both 1 and 3 are set, 3 takes priority.

NOTE:

A call from IS-IPDV, IS-IPDVF or a master station cannot be

transferred to telephone.

Blinks in red.

Appears while the transfer is being performed.

or

Contents

Main Please note that images and illustrations depicted in this manual may differ from the actual ones. IS SERIES OPERATION MANUAL Commercial & Security IP Video Intercom system Standard (IP) System CONTENTS Page INTRODUCTION PRECAUTIONS WARNING Negligence could result in death or serious injury. CAUTION Notes on using this system Notices GETTING STARTED PART NAMES * The notation in < > is used for operational description in this manual. Color monitor master station Color monitor master station (IS-MV) Color monitor IP master station (IS-IPMV) Control panel Monitor Display item examples NOTE: The above display example differs from the actual one. Display examples Displaying call and/or (chime) paging record and reception record Vandal-resistant door station Vandal-resistant audio door station ( ush-mount) (IS-SS) Room sub station Room sub station (IS-RS) OUTLINE OF OPERATIONS possible. A call or talk may not be possible when the communication path is fully occupied. Telephone operations and other telephone-related operations (North America only) Operations you can do between sites (communication, transferring, paging, door release, etc.) Communication Transferring Paging Monitoring Door release Communicating and operating the system with telephone (North America only) SETTING AND ADJUSTMENT MASTER STATION SETTINGS AND ADJUSTMENTS not necessarily equate with the actual displays. Setting items Setting the display language 1 2 Adjusting screen brightness [BRIGHTNESS] 1 2 3 Adjusting sound volume [TONE VOL], [RECEIVE VOL] 1 2 3 Initial settings [INITIAL SETTING] 1) 1 2 3 4 A B C D E F G 1 2 C 1 2 3 4 D 1 2 3 4 5 1 2 3 F 1 2 3 G 1 2 3 USING THE SYSTEM RECEIVING AND ANSWERING A CALL ON THE MASTER STATION Receiving a call The call tone rings, and the corresponding display appears. Lights up. Answering a call Answer the call in one of the following ways. Communication in the hands-free mode <When called in from a sub station> 1) 1 1) 2) Press 2 Viewing video images at a video door station Left Right Down Switching Zoom/Wide Pan & Tilt 1 Transferring to another master station Communication transferring 1 2 3 4 5 Door release Press while being called from, communicating with, or monitoring the sub station. Using the PRIVACY function To activate the PRIVACY function PERFORMING CALLING, MONITORING, PAGING AND CHIME PAGING ON THE MASTER STATION 1 2 3 Searching for a station, zone or remote site from the list A 1 2 3 4 1) 1 2 3 4 C 1 2 3 4 D 2 3 E 2 3 F 2 3 4 Searching for a station or zone by number using the dial keys 1 2 3 Searching for a station, zone or remote site from the placed call or received call list G Page Calling another station (direct voice call) Search for and select the station or remote site you 1 search methods. (P. 28-34) MONITOR . To set the priority, press 2 1 2 3 Scan-monitoring 1 1 2 3 4 5 1 2 3 4 5 OTHER FUNCTIONS Communicating with telephone (North America only) Receiving a transfered call with telephone Transferring call to telephone Answering a transferred call with telephone Sending e-mails Other functions (combined with connected external devices) Activating room sub stations and central control units by detecting contact input Room sub station APPENDIX TECHNICAL PRECAUTIONS AVAILABLE CHARACTER LIST SPECIFICATIONS IP control unit (IS-IPC) Central control unit (IS-CCU) Add-on control unit (IS-SCU) Room sub control unit (IS-RCU) Vandal-resistant video door station (surface-mount) (IS-DV) IP vandal-resistant video door station (surface- mount) (IS-IPDV) Vandal-resistant video door station ( ush-mount) (IS-DVF) IP vandal-resistant video door station ( ush-mount) (IS-IPDVF) Vandal-resistant audio door station ( ash-mount) (IS-SS) Power supply unit (IS-PU-UL, IS-PU-S) WARRANTY