BSearching for a station in your site by designating an area [STATIONS BY AREA]
1Select [STATIONS BY AREA] either in the standby mode (→P. 28) or the SEARCH LIST. (→P. 29)
2Press 
to select the target area from the list (so that it is highlighted), and then press ZOOM/WIDE to select.
All the stations in the area are displayed in the list.
3Press 
to select the target station (so that it is highlighted).
*You can select up to 5 stations. (→P. 30)
4Start calling (talking), monitoring or paging by following the procedure for the corresponding performance. (→P.
CSearching for a station in your site by designating a station type [STATIONS BY TYPE]
1Select [STATIONS BY TYPE] from the SEARCH LIST. (→P. 29)
All the station types are displayed in the list.
2 Press 
to select the target station type from the list (so that it is highlighted), and then press ZOOM/WIDE to select.
All the stations of the selected type are displayed in the list.
3 Press 
to select the target station (so that it is highlighted).
*You can select up to 5 stations. (→P. 30)
4 Start calling (talking), monitoring or paging by following the procedure for the corresponding performance. (→P.
GETTING STARTED SETTING AND ADJUSTMENT USING THE SYSTEM
APPENDIX
31
