Aiphone IS operation manual Monitor, Display item examples

■Monitor

Display item examples

List of stations, zones and/or remote sites (→P. 30)

The list of the stations, zones and/or remote sites you searched for is shown here. Stations, zones and/or remote sites are displayed either by number and/ or name depending on the setting on the "INITIAL SETTING".

*“NOT AVAILABLE” appears in the list when a corresponding station, zone or remote site is not detected.

List page no. (→P. 17)

When the list of stations, zones and/or remote sites, or setting items consists of two or more pages, the current page no. is shown here.

Information display (→"USING THE SYSTEM")

Displays the name (or number) of selected or calling station, operation method, etc.

Function buttons

The function buttons are also enabled when the function indicators just above the buttons are displayed.

*The function name on an indicator may differ from the name of the corresponding button. In that case, the button operates as the function of the indicator.

Function indicators

The indicators differ depending on the display mode.

* These are not touch panel keys.

NOTE:

The above display example differs from the actual one.

Status display icons

The following icons are displayed here depending on the status of the master station.

*The color of an icon changes according to the priority level. Normal: green

Priority: yellow

Urgent: red

Icons	The status when the icon appears
	Appears while talking to the target station, being called
	from another master station, etc.
	Appears while being called.

Appears while being called from two or more sub stations. (For example, “002” on the figure shows that 2 calls are coming in at the same time.)

* There is a case that “001” appears on the icon when being called from a station while talking to another.

*This icon will not be displayed on an IP master station (IS-IPMV).

Appears when paging.

Appears when the image on the monitor is adjusted by pressing the ADJUST button.

Appears while the door release is activated by pressing the door release button.

Appears when the microphone volume is set to OFF, or the PRIVACY function is activated.

Appears while transferring is suspended.

Appears while receiving a call from a station transferred by another one.

*This icon also appears on the station that performs transferring.

Appears while searching for a station, zone or remote site.

Appears while monitoring.

Appears during scan-monitoring.

Appears when an error message is displayed.

Appears when a setting screen is displayed.

Appears while performing chime paging.

Appears when the microphone volume is set to ON.

Shows it is a waiting time for shifting to the next performance, etc.

GETTING STARTED SETTING AND ADJUSTMENT USING THE SYSTEM

APPENDIX

7