Viewing video images at a video door station | Aiphone IS guide

Viewing video images at a video door station

You can view video images at the target station when receiving a call from or communicating with a video door station, or monitoring a video door station in your site. The video images can be adjusted as necessary by using the following functions on the master station.

■Switching Zoom/Wide

The display mode on the monitor can be switched between zoom and wide by each press of ZOOM/WIDE .

ZOOM/WIDE

Wide

Zoom

NOTES:

•The preset position of zoom image is set in the System setting on a PC.

•When the display mode switches from wide to zoom, the zoom image from the preset position is displayed.

•Depending on the properties of the video door station camera, the wide image may appear more distorted than the zoom image but this is not a malfunction.

•In the zoom mode, the image can be moved from right to left or up and down.

■ Pan & Tilt

When a zoom image is displayed, pressing	moves the
image as shown below.

Up

Left Right

Down

NOTES:

•The image range of the zoom mode and wide mode differs. The edge of wide image will not be displayed with the zoom mode.

•At night, the object image may be blurred and less-visible when moving the image from right to left or up and down because illumination to the object is reduced. The same applies to a moving object.

24

Image 24

Aiphone IS Viewing video images at a video door station, Switching Zoom/Wide, Pan & Tilt, Wide Zoom, Left Right Down

Contents

Standard IP System 834174 B P0811JZ Contents Calling another station Direct voice call Monitoring Viewing video images at Target station Paging Chime paging Precautions General PrecautionsIntroduction Unit becomes inoperative during power failure Part Names Color monitor master station Monitor Display item examples Standby mode Display examples Vandal-resistant door station Vandal-resistant audio door station ﬂush-mount IS-SS Room sub station IS-RS Transmit LED red Outline of Operations IS-CCU Communication You cannot monitor or scan-monitor a remote site Electric door strike Door station Room sub station Master Station Settings and Adjustments Setting items Adjusting screen brightness Brightness Adjusting sound volume Tone VOL Initial settings Initial Setting Basic setting procedureSetting the call-in tones Door Call Tone Room SUB Call Tone Setting the display modes of the monitor Display You can make the following settings for the display modesPress to select the desired search item so that Sub items are displayed Transfer Delay Call TransferSchedule Transfer Privacy Mode Telephone TransferPRIVACY-2 Call Tone Receiving a call Call tone rings, and the corresponding display appearsLights up Communication in the hands-free mode Communication in the press-to-talk modeWhen called in from a sub station Answer the call in one of the following ways Communication by using the handset When two or more calls have arrived IS-MVHands-free mode Press-to-talk mode Switching Zoom/Wide Viewing video images at a video door stationPan & Tilt Wide Zoom Adjusting images Press Adjust when the image is difﬁcult to seeTo restore the image before adjustment Press Adjust again When both 1 and 3 are set, 3 takes priority Communication transferringCall transferring While receiving a call To communicate with the caller Standby mode Search itemsStations by Area →P Placed Calls →P Name Search →P Received Calls →P Search List Name Search →P Stations by Area →P Stations by Type →PPaging Zone →P Chime Zone →P Remote Site →P When searching for MASTER004 Press the dial keys as follows Searching for a station, zone or remote site from the listPress You cannot select two or more remote sites Select Stations by Type from the Search LIST. →P All the stations in the area are displayed in the listYou can select up to 5 stations. →P All the station types are displayed in the list Remote Site Placed Calls Press to select Placed Calls in the standby mode. →PPress to select Received Calls in the standby mode. →P You can select up to 5 stations and/or zones. →PPage Calling another station direct voice call Press OFF or hang up the handset to ﬁnish communicating Viewing video images at the target station MonitoringScan-monitoring To shift to scan-monitoring Making chime paging automatically Other Functions Communicating with telephone North America only Other functions combined with connected external devices Room sub stationCentral control unit It is also possible to set to stop the current chime paging Technical Precautions Available Character List Specifications Vandal-resistant video door station surface-mount IS-DV Vandal-resistant video door station ﬂush-mount IS-DVFIP vandal-resistant video door station ﬂush-mount IS-IPDVF Vandal-resistant audio door station ﬂash-mount IS-SS Power supply unit IS-PU-UL, IS-PU-S Warranty For US marketObject area of is the EU For Canada market