Communication, Transferring | Aiphone IS specification

Communication

•On a sub station (door station or room sub station), you can call up to 20 preset master stations in your site at the same time. Or you can call up to 19 master stations in your site and a remote site (up to 20 master stations at the remote site).

•On a master station (IS-MV), you can select a call from the list of incoming calls and answer it.

•On a master station, the communication method can be selected from the hands-free mode, the press-to-talk mode, or using the

handset. (→P. 22)

•You can also communicate with a remote site (the pilot station registered in the site).

Door station

Room sub station

Master station

Communication

or

				Communication
		Target
Operation	In your site	In a remote site	In a remote site
	(standard (IP)	(standard (IP)	(network direct
	system)	system)	system)
Calling	✓	✓	✓
Communication	✓	✓	✓	Master station
✓ : Possible

Hands-free

Press-to-talk

Using the handset

Transferring

When communicating with a received call on a master station, you can transfer it to another master station in your site. (→P. 26)

Door station

Room sub station

Master station

Master station

or

Call

Transfer

*You can also make a transfer setting for transferring calls to a designated master station automatically.

*For a call from another master station, you can transfer it when you are communicating with it (not to the remote site).

*You can also transfer a call to a remote site. (However, you cannot transfer a call received from a remote site to another remote site.)

*You cannot transfer a communication to a remote site.

		Target
Operation	In your site	In a remote site	In a remote site
	(standard (IP) system)	(standard (IP) system)	(network direct system)
Communication transferring	✓	—	—

Call transferring (automatic)	✓	✓	✓

Scheduled call transferring (automatic)	✓	✓	✓

✓ : Possible — :Impossible

12

Image 12

Aiphone IS operation manual Communication, Transferring

Contents

Standard IP System 834174 B P0811JZ Contents Calling another station Direct voice call Monitoring Viewing video images at Target station Paging Chime paging Precautions General PrecautionsIntroduction Unit becomes inoperative during power failure Part Names Color monitor master station Monitor Display item examples Standby mode Display examples Vandal-resistant door station Vandal-resistant audio door station ﬂush-mount IS-SS Room sub station IS-RS Transmit LED red Outline of Operations IS-CCU Communication You cannot monitor or scan-monitor a remote site Electric door strike Door station Room sub station Master Station Settings and Adjustments Setting items Adjusting screen brightness Brightness Adjusting sound volume Tone VOL Initial settings Initial Setting Basic setting procedureSetting the call-in tones Door Call Tone Room SUB Call Tone Setting the display modes of the monitor Display You can make the following settings for the display modesPress to select the desired search item so that Sub items are displayed Transfer Delay Call TransferSchedule Transfer Privacy Mode Telephone TransferPRIVACY-2 Call Tone Receiving a call Call tone rings, and the corresponding display appearsLights up Communication in the hands-free mode Communication in the press-to-talk modeWhen called in from a sub station Answer the call in one of the following ways Communication by using the handset When two or more calls have arrived IS-MVHands-free mode Press-to-talk mode Switching Zoom/Wide Viewing video images at a video door stationPan & Tilt Wide Zoom Adjusting images Press Adjust when the image is difﬁcult to seeTo restore the image before adjustment Press Adjust again When both 1 and 3 are set, 3 takes priority Communication transferringCall transferring While receiving a call To communicate with the caller Standby mode Search itemsStations by Area →P Placed Calls →P Name Search →P Received Calls →P Search List Name Search →P Stations by Area →P Stations by Type →PPaging Zone →P Chime Zone →P Remote Site →P When searching for MASTER004 Press the dial keys as follows Searching for a station, zone or remote site from the listPress You cannot select two or more remote sites Select Stations by Type from the Search LIST. →P All the stations in the area are displayed in the listYou can select up to 5 stations. →P All the station types are displayed in the list Remote Site Placed Calls Press to select Placed Calls in the standby mode. →PPress to select Received Calls in the standby mode. →P You can select up to 5 stations and/or zones. →PPage Calling another station direct voice call Press OFF or hang up the handset to ﬁnish communicating Viewing video images at the target station MonitoringScan-monitoring To shift to scan-monitoring Making chime paging automatically Other Functions Communicating with telephone North America only Other functions combined with connected external devices Room sub stationCentral control unit It is also possible to set to stop the current chime paging Technical Precautions Available Character List Specifications Vandal-resistant video door station surface-mount IS-DV Vandal-resistant video door station ﬂush-mount IS-DVFIP vandal-resistant video door station ﬂush-mount IS-IPDVF Vandal-resistant audio door station ﬂash-mount IS-SS Power supply unit IS-PU-UL, IS-PU-S Warranty For US marketObject area of is the EU For Canada market