Initial settings [INITIAL SETTING]
Make the initial settings before beginning to use the master station. You can set the following items under [INITIAL SETTING].
■ [DOOR CALL TONE] | A | |
■ [ROOM SUB CALL TONE] | ||
|
001■ [COMMUNICATION METHOD] 
B
■[DISPLAY] 
C
■[SPEED DIAL] 
D
■[TRANSFER] 
E
002 ■ [PRIVACY] 
F
■[INITIALIZATION] 
G
Basic setting procedure
1)Press SETTING in the standby mode. The setting screen appears.
2)Press 
repeatedly to select [INITIAL SETTING] (so that it is highlighted).
3)Press ZOOM/WIDE to select.
4)Press 
repeatedly to select the item you wish to set (so that it is highlighted).
*Pressing 
repeatedly turns pages of the list. (Page 001/002)
(Page 002/002)
NOTE:
The above display example differs from the actual one.
*When [BACK] is displayed, pressing SETTING will return to the setting screen.
5)Press ZOOM/WIDE to decide on the selected item.
6)Make the settings on the selected item.
(See A - G below for details on each item.)
(NOTE: Step 1 below corresponds to steps 4) and 5) of “Basic setting procedure” above.)
ASetting the call-in tones [DOOR CALL TONE] and
[ROOM SUB CALL TONE]
You can set the
1 Press 
repeatedly to select [DOOR CALL TONE] or [ROOM SUB CALL TONE] you wish to set (so that it is highlighted), and then press ZOOM/WIDE to decide on the selected item.
2 (When setting [DOOR CALL TONE]) :
Press 
repeatedly to select [DOOR CALL:
NORMAL], [DOOR CALL: PRIORITY] or [DOOR
CALL: URGENT] (so that it is highlighted), and then press ZOOM/WIDE to decide on the selected one.
3 Press | repeatedly to select the desired tone |
(1 to 6), and then press ZOOM/WIDE to decide on | |
the selected one. | |
*You can check the selected tone by hearing it whenever selected.
4 In the same way, set the tone for other priorities, and also for [ROOM SUB CALL TONE].
*Press SETTING as “BACK” function to return to the previous screen.
GETTING STARTED SETTING AND ADJUSTMENT USING THE SYSTEM
APPENDIX
17
