[TELEPHONE TRANSFER]:

Press repeatedly to select ON or OFF, and then press ZOOM/WIDE to decide on the selected one.

*When "ON" is selected, the LED on TRANSFER lights up (red).

[SCHEDULE TEL TRANSFE] (Schedule telephone transfer):

Press repeatedly to select ON or OFF, and then press ZOOM/WIDE to decide on the selected one.

FSetting the PRIVACY function [PRIVACY]

Setting of the PRIVACY function is available when called from another master station.

When the PRIVACY MODE is activated, the microphone turns off and you will not be heard by the caller.

Sub item

Description

Setting range

[PRIVACY MODE]

Sets whether or not to

(PRIVACY MODE) 1:

 

activate the PRIVACY

The microphone is off

 

function. To activate

(mute).

 

the PRIVACY function,

(PRIVACY MODE) 2:

 

select the PRIVACY

The microphone is off

 

MODE 1 or 2.

(mute) and the caller

 

 

and you are notified by

 

 

a tone when you receive

 

 

the call that you are in

 

 

the PRIVACY MODE.

 

 

OFF:

 

 

The microphone is on.

[PRIVACY-2 CALL

(Available when

1-6

TONE]

(PRIVACY MODE) 2 is

 

 

selected.)

 

 

Selects the call tone

 

 

from 6 types.

 

1 Press repeatedly to select [PRIVACY] (so that it is highlighted), and then press ZOOM/WIDE to select.

The sub items are displayed.

*The sub items can also be displayed by pressing PRIVACY in the standby mode.

2 Press repeatedly to select the sub item [PRIVACY MODE] or [PRIVACY-2 CALL TONE] you wish to set (so that it is highlighted), and then press ZOOM/WIDE to decide on the selected one.

3 Make the settings on each sub item as follows.

[PRIVACY MODE]:

Press repeatedly to select the desired mode (so that it is highlighted), and then press ZOOM/WIDE to decide on the selected one.

*When (PRIVACY MODE) 1 or (PRIVACY MODE) 2 is selected, the LED on PRIVACY lights up (red).

[PRIVACY-2 CALL TONE]:

*This setting is available only when [PRIVACY MODE] is set to (PRIVACY MODE) 2.

Press repeatedly to select the desired call tone, and then press ZOOM/WIDE to decide on the selected one.

*You can check the selected tone by hearing it whenever selected.

GInitializing the set contents [INITIALIZATION]

You can reset all the set contents to default.

1Press repeatedly to select [INITIALIZATION] (so that it is highlighted), and then press ZOOM/WIDE to select.

“RETURN TO DEFAULT ?” is displayed.

2 Press ZOOM/WIDE to continue the initialization procedure.

3 Press repeatedly to select [YES] (so that it is highlighted) to perform initializing, and then press ZOOM/WIDE to select.

*Select [NO] if you will cancel initialization.

NOTE:

If you have repositioned the master station, initialize it to clear the speed dial settings etc., and make the settings again.

20

Page 20
Image 20
Aiphone IS operation manual Telephone Transfer, Privacy Mode, PRIVACY-2 Call Tone