Searching for a station or zone by number using the dial keys
1 Enter the number of the station or zone in your site you want to search for by using the dial keys in the standby mode.
The entered numbers are displayed, and all the stations and/or zones that include the entered number are displayed in the list.
*The search is narrowed down whenever a figure is added.
2 Press 
to select the target station and/or zone (so that it is highlighted).
*You can select up to 5 stations and/or zones. (→P. 30)
3 Start calling (talking), monitoring or paging by following the procedure for the corresponding performance. (→P.
Searching for a station, zone or remote site from the placed call or received call list
You can search for a station, zone or remote site from the most recent 20 items of the call and/or (chime) paging record or reception record.
*The items are displayed in the list in chronological order.
GSearching for a station, zone or remote site from the call and/or (chime) paging record list
[PLACED CALLS]
1Press 
to select [PLACED CALLS] in the standby mode. (→P. 28)
Up to 20 items (target stations, zones or remote sites) of the most recent call and/or (chime) paging you performed are displayed in the list.
2 Press 
to select the target station, zone or remote site (so that it is highlighted).
3 Start calling (talking), monitoring, paging or chime paging by following the procedure for the corresponding performance. (→P.
HSearching for a station or remote site from the reception record list [RECEIVED CALLS]
1Press 
to select [RECEIVED CALLS] in the standby mode. (→P. 28)
Up to 20 items (stations or remote sites) of the most recent call and/or paging you received are displayed in the list.
2 Press 
to select the target station or remote site (so that it is highlighted).
3 Start calling (talking) or monitoring by following the procedure for the corresponding performance. (→P. 35, 36)
GETTING STARTED SETTING AND ADJUSTMENT USING THE SYSTEM
APPENDIX
33
