Setting the display language
When the master station is started up for the first time, the [DISPLAY LANGUAGE] setting screen appears on the monitor. The display language for the monitor screen is set to English as default. First change it to the language you need as follows.
1 Press 
repeatedly to select the target language (so that it is highlighted).
2 Press ZOOM/WIDE to decide on the selected one.
ZOOM/WIDE
NOTE:
If the [DISPLAY LANGUAGE] setting screen does not appear, press SETTING , then select [INITIAL SETTING] → [DISPLAY] →
[DISPLAY LANGUAGE], and then select the target language. (→ P.
Adjusting screen brightness [BRIGHTNESS]
You can adjust the brightness of the monitor in 10 levels.
*This adjustment can also be made while receiving a call, communicating or monitoring (when [SETTING] is displayed on the monitor).
1 Press SETTING in the standby mode.
The setting screen appears.
2 | Press | (Pan & Tilt control button) repeatedly to |
| select [BRIGHTNESS] (so that it is highlighted). | |
3 Press 
repeatedly to change the level.
*You can see the change of brightness as you change the value.
Adjusting sound volume [TONE VOL],
[RECEIVE VOL]
You can adjust the sound volume of call tone [TONE VOL] and receiving tone [RECEIVE VOL] respectively. The adjusting range is off and 1 to10.
*This adjustment can also be made while receiving a call, communicating or monitoring (when [SETTING] is displayed on the monitor).
1 Press SETTING in the standby mode.
The setting screen appears.
2 Press 
repeatedly to select [TONE VOL] or [RECEIVE VOL] you wish to adjust (so that it is highlighted).
3 Press 
repeatedly to change the level.
*The call tone sounds in the selected level.
*If you change the level when communicating, you can check the receiving sound volume of the selected level as it's changed.
*This icon is displayed when the volume is set to off.
16
