USING THE SYSTEM

RECEIVING AND ANSWERING A CALL ON THE MASTER STATION

The following describes the communication method using this system.

*When receiving a call from a remote site, the operation methods are the same as described below, however it may take a longer time for some operations and their responses. For example, there may be a time difference between a call starting at a remote site and the call tone ringing on the target master station in your site.

Receiving a call

Door station

Room sub station

Another master station

PC master station

(in your site or a remote site)

(in your site or a remote site)

(in your site or a remote site)

(in your site or a remote site)

or

Press

or

Press or Lift the handset.

or

(See page 35 for

(See the “OPERATION

how to call from a

MANUAL” for the PC

master station.)

master station (IS-SOFT).

GETTING STARTED SETTING AND

1 The call tone rings, and the corresponding display appears.

*The call tone from a sub station differs from the setting. (→P. 17) e.g.) When called from a video door station

Lights up.

*1

The station no., station name and video image at the calling station (following the symbol image) are displayed.

(When called from a remote site, the site no., site name and video image at the calling station (following the symbol image) are displayed. The station name will not be displayed.)

*It may take long until a video image appears on the monitor.

*When an audio door station, room sub station or another master station calls in, the station type image is displayed. (The image differs from the calling station type.) When called from a remote site, the remote site symbol image is displayed.

*An incoming call from another master station will be a direct voice call. (However, when the PRIVACY MODE is set to “2”, you will be notified of an incoming call by the display information and call tone.)

*When you answer a call, the call tone of subsequent incoming calls should be muted until you conclude the first call (except when using IS-IPMV).

*1: LIST

Press to display the list of stations when two or more calls are received. You can select the desired one and start communicating with the caller. (→P. 23)

NOTE:

An IS-IPMV cannot receive two or more calls at a time.

21

ADJUSTMENT USING THE SYSTEM

APPENDIX

Page 21
Image 21
Aiphone IS operation manual Receiving a call, Call tone rings, and the corresponding display appears, Lights up