Chapter 3 Commands Specific to the Content Switching Module with SSL

show ssl-proxy natpool

show ssl-proxy natpool

To display information about the NAT pool, use the show ssl-proxy natpool command.

show ssl-proxy natpool [name]

Syntax Description

 

name

(Optional) NAT pool name.

 

 

 

 

Defaults

 

This command has no default settings.

Command Modes

Command History

EXEC

Release

Modification

Cisco IOS Release

Support for this command was introduced on the Catalyst 6500 series

12.1(13)E and

switches.

SSL Services Module

 

Release 1.1(1)

 

 

 

CSM-S release 1.1(1)

This command was introduced.

 

 

Examples

This example shows how to display information for a specific NAT address pool that is configured on

 

the Content Switching Module with SSL:

 

ssl-proxy#show ssl-proxy natpool NP1

 

Start ip: 207.57.110.1

 

End ip: 207.57.110.8

 

netmask: 255.0.0.0

 

vlan associated with natpool: 2

 

SSL proxy services using this natpool:

 

S2

 

S3

 

S1

 

S6

 

Num of proxies using this natpool: 4

 

ssl-proxy#

 

ssl-proxy natpool

Related Commands

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

 

OL-7029-01

3-35

 

 

 

Page 257
Image 257
Cisco Systems OL-7029-01 manual Show ssl-proxy natpool name, Name Optional NAT pool name