Cisco Systems OL-7029-01 manual Ssl-proxy ssl ratelimit, Ssl-proxyy ssl ratelimit

Chapter 3 Commands Specific to the Content Switching Module with SSL

ssl-proxy ssl ratelimit

ssl-proxy ssl ratelimit

	To prohibit new connections during overload conditions, use the ssl-proxyy ssl ratelimit command.
	Use the no form of this command to allow new connections if memory is available.
	ssl-proxyy ssl ratelimit
	no ssl-proxyy ssl ratelimit
Syntax Description	This command has no arguments or keywords.
Defaults	This command has no default settings.
Command Modes	Global configuration
Command History	Release	Modification
	Cisco IOS Release	Support for this command was introduced on the Catalyst 6500 series
	12.1(13)E and	switches.
	SSL Services Module
	Release 1.1(1)
	CSM-S release 1.1(1) This command was introduced.
Examples	This example shows how to prohibit new connections during overload conditions:
	ssl-proxy (config)# ssl-proxy ssl ratelimit
	ssl-proxy (config)#

This example shows how to allow new connections during overload conditions if memory is available:

ssl-proxy (config)# no ssl-proxy ssl ratelimit

ssl-proxy (config)#

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01 3-73