Cisco Systems OL-7029-01 manual Redirect-vserver real server submode

Chapter 2 Content Switching Module with SSL Commands

redirect-vserver (real server submode)

redirect-vserver (real server submode)

To configure a real server to receive traffic redirected by a redirect virtual server, use the redirect-vservercommand in the SLB real server configuration submode. To specify that traffic is not redirected to the real server, use the no form of this command.

redirect-vserver name no redirect-vserver

Syntax Description	name	Name of the virtual server that has its requests redirected.
Defaults	Traffic is not redirected to the server.
Command Modes	SLB real server configuration submode
Command History	Release	Modification
	CSM release 1.1(1)	This command was introduced.
	CSM-S release 1.1(1)	This command was introduced.

Usage Guidelines

Examples

Related Commands

Mapping real servers to redirect virtual servers provides persistence for clients to real servers across TCP sessions. Before using this command, you must create the redirect virtual server in serverfarm submode with the redirect-vservercommand.

This example shows how to map a real server to a virtual server:

Cat6k-2(config-slb-sfarm)# real 10.2.2.1

Cat6k-2(config-slb-real)# redirect-vserver timely

real redirect-vserver show module csm real

show module csm vserver redirect

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01 2-79