Cisco Systems OL-7029-01 manual Port Capp UDP submode, Port portnum no port, Capp udp

Chapter 2 Content Switching Module with SSL Commands

port (CAPP UDP submode)

port (CAPP UDP submode)

To set the port number for CAPP UDP connections, use the port command in the CAPP UDP submode. To remove the port from the configuration, use the no form of this command.

port port_num no port

Syntax Description	port_num	Specifies the UDP port number. Enter a value of 1 to 65535.
	The no form of this command sets the port to 5002.
Defaults

Command Modes

Command History

CSM CAPP UDP submode

Release	Modification
CSM release 2.2(1)	This command was introduced.
CSM-S release 1.1(1)	This command was introduced.

Examples	This example shows how to set the port for CAPP connections:
	Cat6k-2(config-slb-capp-udp)# 50
	capp udp
Related Commands

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

2-6 OL-7029-01