Cisco Systems OL-7029-01 manual Exit

Chapter 2 Content Switching Module with SSL Commands

exit

exit

	To log out of the system or to leave a subcommand mode, use the exit command.
	exit
Syntax Description	This command has no arguments or keywords.
Defaults	This command has no default settings.
Command Modes	Command mode
	To leave a subcommand mode, use the exit command. The exit command saves any changes before
Usage Guidelines
	leaving the submode.
Examples	This example shows how to log out of the CSM:
	Cat6k-2(config-module-csm)# exit
	Cat6k-2(config)#

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01 2-13