Cisco Systems OL-7029-01 manual Maxconns owner submode, Maxconns number no maxconns

Chapter 2 Content Switching Module with SSL Commands

maxconns (owner submode)

maxconns (owner submode)

To configure the maximum number of concurrent connections allowed for an owner object, use the maxconns command in owner configuration submode. To remove the maximum connections from the owner configuration, use the no form of this command.

maxconns number no maxconns

Syntax Description	number	The number of maximum connections to the owner object.
Defaults	This command has no default settings.
Command Modes	Module CSM configuration submode
Command History	Release	Modification
	CSM release 3.1(1)	This command was introduced.
	CSM-S release 1.1(1)	This command was introduced.
Usage Guidelines	When the maximum number of connections is reached, the connections are reset and the CSM does not
	accept further connections.
Examples	This example shows how to configure an owner object:
	Cat6k-2(config-owner)# maxconns 300
	billing-info (owner submode)
Related Commands
	contact-info (owner submode)
	owner

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01 2-43