Cisco Systems OL-7029-01 manual Map url-map-name url no map url-map-name, Url-map-name

Chapter 2 Content Switching Module with SSL Commands

map url

map url

To enter the SLB URL map mode and configure a URL map, use the map url command. To remove the URL map from the configuration, use the no form of this command.

map url-map-name url no map url-map-name

Syntax Description	url-map-name	Name of an SLB URL map; the character string range is from 1 to
		15 characters.
Defaults	This command has no default settings.
Command Modes	SLB URL map configuration submode
Command History	Release	Modification
	CSM release 1.1(1)	This command was introduced.
	CSM-S release 1.1(1)	This command was introduced.
Usage Guidelines	Any match of a URL regular expression in the URL map results in a successful match. A maximum of
	1023 URLs can be configured to a map.
Examples	This example shows how to group URLs and associate them with a content switching policy:
	Cat6k-2(config-module-csm)# map m1 url
	Cat6k-2(config-slb-map-url)#match protocol http url /index.html
	Cat6k-2(config-slb-map-url)#match protocol http url /stocks/csco/
	Cat6k-2(config-slb-map-url)# match protocol http url *gif
	Cat6k-2(config-slb-map-url)# match protocol http url /st*
	Cat6k-2(config-slb-map-url)# exit
	Cat6k-2(config)
	match protocol http url (URL map submode)
Related Commands
	show module csm map
	url-map (policy submode)

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01 2-33