Cisco Systems OL-7029-01 manual Ssl-proxy vlan vlan, Admin, Gateway prefix drop forward1

Chapter 3 Commands Specific to the Content Switching Module with SSL

ssl-proxy vlan

ssl-proxy vlan

To enter the proxy-VLAN configuration submode, use the ssl-proxy vlan command. In proxy-VLAN configuration submode, you can configurea VLAN for the Content Switching Module with SSL.

	ssl-proxy vlan vlan
Syntax Description	vlan	VLAN ID; valid values are from 1 to 1005.
Defaults	The defaults are as follows:
	• hellotime is 3 seconds.
	• holdtime is 10 seconds.
	•	priority is 100.

Command Modes

Command History

Global configuration

Release	Modification
Cisco IOS Release	Support for this command was introduced on the Catalyst 6500 series
12.1(13)E and	switches.
SSL Services Module
Release 1.1(1)
SSL Services Module	This command was changed to include the standby keyword and
Release 2.1(1)	arguments to configure HSRP.
CSM-S release 1.1(1)	This command was introduced.

Usage Guidelines VLAN 1 is not supported by the CSM.

Extended-range VLANs are not supported by the Content Switching Module with SSL.

Enter each proxy-VLAN configuration submode command on its own line.

Table 3-10lists the commands that are available in proxy-VLAN configuration submode.

Table 3-10		Proxy-VLAN Configuration Submode Command Descriptions
	Syntax		Description
	admin		Configures the VLAN as an administration VLAN.
	exit		Exits from the proxy-VLAN configuration submode.
	gateway prefix [drop forward1]		Configures the VLAN with a gateway to the Internet.
	help		Provides a description of the interactive help system.
	ipaddr prefix mask		Configures the VLAN with an IP address and a subnet mask.
	no		Negates a command or sets its defaults.
		Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
	3-74		OL-7029-01