Chapter 2 Content Switching Module with SSL Commands
inservice (redirect virtual server submode)
inservice (redirect virtual server submode)
Syntax Description
Defaults
Command Modes
To enable the real server for use by the CSM, use the inservice command in the SLB redirect virtual server configuration submode. If this command is not specified, the virtual server is defined but not used. To disable the virtual server, use the no form of this command.
inservice
no inservice
This command has no arguments or keywords.
The virtual server is disabled.
SLB redirect virtual server configuration submode
Command History |
| Release | Modification |
|
| CSM release 1.1(1) | This command was introduced. |
|
|
|
|
|
| This command was introduced. | |
|
|
| |
|
|
|
|
Examples |
| This example shows how to enable a redirect virtual server for use by the CSM: | |
|
| ||
|
| advertise (virtual server submode) | |
Related Commands |
| ||
|
|
|
|
|
| show module csm vserver redirect | |
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
|
| ||
|
|
