Cisco Systems OL-7029-01 manual Request probe submode, Method get, Method head, Url path

Chapter 2 Content Switching Module with SSL Commands

request (probe submode)

request (probe submode)

To configure the request method used by the HTTP probe, use the request command in the SLB HTTP probe configuration submode. To remove the request method from the configuration, use the no form of this command.

request [method {get head}] [url path]

no request [method {get head}] [url path]

Syntax Description	method get	(Optional) Configures a method for the probe request and directs the
		server to get this page.
	method head	(Optional) Configures a method for the probe request and directs and
		directs the server to get only the header for this page.
	url path	(Optional) A character string up to 255 characters specifying the
		URL path.
Defaults	The default path is /.
	The default method is the get option.
Command Modes	SLB HTTP probe configuration submode
Command History	Release	Modification
	CSM release 1.1(1)	This command was introduced.
	CSM-S release 1.1(1)	This command was introduced.
	The CSM supports only the get and head request methods. This command is for HTTP probes.
Usage Guidelines
Examples	This example shows how to configure a request method for the probe configuration:
	Cat6k-2(config-slb-probe-http)# request method head
	probe
Related Commands
	show module csm probe

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01 2-69