Cisco Systems OL-7029-01 manual Script probe submode, Script scriptname, Failed probe submode

Chapter 2 Content Switching Module with SSL Commands

script (probe submode)

script (probe submode)

To create a script for a probe, use the script command.

script script_name

Syntax Description

Defaults

Command Modes

script_name Specifies a probe script.

This command has no default settings.

SLB probe script configuration submode

Command History	Release	Modification
	CSM release 3.1(1)	This command was introduced.
	CSM-S release 1.1(1)	This command was introduced.
Usage Guidelines	The script name should match a script in a configured script file.
Examples	This example shows how to create a script probe:
	Cat6k-2(config-module-csm)#ip slb script file tftp://192.168.10.102/csmScripts
	Cat6k-2(config-probe-script)# script echoProbe.tcl
	Cat6k-2(config-probe-script)# interval 10
	Cat6k-2(config-probe-script)# retries 1
	Cat6k-2(config-probe-script)# failed 30
	failed (probe submode)
Related Commands
	interval (probe submode)
	open (probe submode)
	probe
	receive (probe submode)
	retries (probe submode)

script file

show module csm probe

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01 2-71