Cisco Systems OL-7029-01 manual Failed probe submode, Failed failed-interval no failed

Chapter 2 Content Switching Module with SSL Commands

failed (probe submode)

failed (probe submode)

To set the time to wait before probing a failed server, use the failed command in the SLB probe configuration submode. To reset the time to wait before probing a failed server to default, use the no form of this command.

failed failed-interval no failed

Syntax Description	failed-interval	Specifies the interval in seconds before the probe retires a failed
		server; the range is from 2 to 65535.
Defaults	The default value for the failed interval is 300 seconds.
Command Modes	SLB probe configuration submode
Command History	Release	Modification
	CSM release 1.1(1)	This command was introduced.
	CSM-S release 1.1(1)	This command was introduced.
Usage Guidelines	This command is used for all probe types.
Examples	This example shows how to configure a failed server probe for 200 seconds:
	Cat6k-2(config-slb-probe-http)# failed 200
	probe
Related Commands
	show module csm probe

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01 2-61