Cisco Systems OL-7029-01 manual Debug ssl-proxy

Chapter 3 Commands Specific to the Content Switching Module with SSL

debug ssl-proxy

debug ssl-proxy

To turn on the debug flags in different system components, use the debug ssl-proxycommand. Use the no form of this command to turn off the debug flags.

debug ssl-proxy {app fdu [type] ipc pki [type] ssl [type] tcp [type]}

Syntax Description	app	Turns on App debugging.
	fdu type	Turns on FDU debugging; (optional) type valid values are cli, hash, ipc,
		and trace. See the “Usage Guidelines” section for additional information.
	ipc	Turns on IPC debugging.
	pki type	Turns on PKI debugging; (optional) type valid values are cert, events,
		history, ipc, and key. See the “Usage Guidelines” section for additional
		information.
	ssl type	Turns on SSL debugging; (optional) type valid values are alert, error,
		handshake, and pkt. See the “Usage Guidelines” section for additional
		information.
	tcp type	Turns on TCP debugging; (optional) type valid values are event, packet,
		state, and timers. See the “Usage Guidelines” section for additional
		information.

Defaults

Command Modes

Command History

This command has no default settings.

EXEC

Release	Modification
Cisco IOS Release	Support for this command was introduced on the Catalyst 6500 series
12.1(13)E and	switches.
SSL Services Module
Release 1.1(1)
CSM-S release 1.1(1)	This command was introduced.

Usage Guidelines The fdu type includes the following values:

•cli—Debugs the FDU CLI.

•hash—Debugs the FDU hash.

•ipc —Debugs the FDU IPC.

•trace—Debugs the FDU trace.

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

3-20 OL-7029-01