2-167
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
idle (virtual server submode)
idle (virtual server submode)To control the amount of time the CSM maintains connection information in the absence of packet
activity, use the idle command in the SLB virtual server configuration submode. To change the idle timer
to its default value, use the no form of this command.
idle duration
no idle
Syntax Description
Defaults The default is 3600.
Command Modes SLB virtual server configuration submode
Command History
Usage Guidelines If you do not specify a duration value, the default value is applied.
Examples This example shows how to specify an idle timer duration of 4000:
Cat6k-2(config-slb-vserver)# idle 4000
Related Commands advertise (virtual server submode)
show module csm vserver redirect
advertise (virtual server submode)
duration Idle connection timer duration in seconds; the range is from 0
(connection remains open indefinitely) to 13500000.
Release Modification
CSM-S release 1.1(1) This command was introduced.
CSM-S release 1.1(1) The minimum value for duration was changed from 4 to 0.