2-188
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
vlan
vlan
To define which source VLANs may access the virtual server, and then enter the VLAN submode, use
the vlan command in the CSM submode. To remove the VLAN, use the no form of this command.
vlan vlan-number [client | server]
no vlan
Syntax Description
Defaults The default is all VLANs.
Command Modes SLB configuration submode
Command History
Usage Guidelines The VLAN must correspond to an SLB VLAN previously created with the vlan command.
Examples This example shows how to specify a VLAN for virtual server access:
Cat6k-2(config-slb-csm)# vlan 5
Related Commands alias (VLAN submode)
gateway (VLAN submode)
ip address (VLAN submode)
route (VLAN submode)
show module csm vlan
vlan-number VLAN that the virtual server may access.
client | server (Optional) Specifies the client-side or server-side VLAN.
Release Modification
CSM release 2.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.