Nikon COOLPIXS100PURPLE, COOLPIXS100RED, COOLPIXS100GOLD, COOLPIXS100BLK manual Error Messages, E100

Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

	Display	Description	Solution	A
	O(blinks)	Clock not set.	Set date and time.	E80
	N	Battery exhausted.	Charge or replace battery.	14, 16
	Battery exhausted.
			Turn off camera, and allow
			battery to cool down
	P	Battery temperature is	before resuming use. When
	Battery		this message appears, the	21
		high.
	temperature high		power-on lamp blinks
			rapidly for five seconds and
			the monitor turns off.
	P	Inside of the camera or the	Turn off camera, and allow
	The camera will
		memory card has become	battery to cool down	21
	turn off to prevent
		hot.	before resuming use.
	overheating.
	P	The slide cover (power	Open or close the slide
	Check the sliding			21
		switch) is not fully open.	cover fully.
	cover
Reference			• Refocus.	28, 29
			• Focus on another subject	39
	Q(● blinks red)	Camera cannot focus.	positioned at the same
Section			distance from the camera
			as the intended subject.
			Wait until message clears
	P		from display automatically
		Camera cannot perform	when recording is
	Please wait for the
		other operations until	complete. Do not open the	–
	camera to finish
		recording is complete.	battery-chamber/memory
	recording.
			card slot cover during
			recording.
	u	Write-protect switch is in	Slide write-protect switch
	Memory card is			–
		“lock” position.	to “write” position.
	write protected.
	P		• Use approved card.	19
	This card cannot be
			• Check that terminals are	18
	used.	Error accessing memory
			clean.
	P	card.
			• Confirm that memory	18
	This card cannot be
			card is correctly inserted.
	read.

E100