Nikon COOLPIXS100RED Tap, Daylight Saving Time, Changing the Language or Date and Time Setting

Step 1 Turn the Camera On

6Tap I.

•The clock is activated and the camera enters shooting mode.

Date and time

DMY

15 11 2011 14 : 30

Daylight Saving Time

If daylight saving time is in effect, tap p in the time zone selection screen displayed in step 3 to turn on the daylight saving time function.

When the daylight saving time function is enabled, W is displayed at the top of the monitor. To turn off the daylight saving time function, tap p again.

Home time zone

London

Casablanca

Basic Steps for Shooting

CChanging the Language or Date and Time Setting

•You can change these settings using the Language and Time zone and date settings in the setup menu (A88).

•When the daylight saving time function is enabled in Time zone in Time zone and date in the setup menu, the camera clock moves forward one hour, and when it is disabled, it moves back one hour. When Travel destination (x) is selected, the local time is automatically calculated and the shooting date and time of the selected region are recorded with the pictures.

•If you exit without setting the date and time, Owill blink when the shooting screen is displayed. Use the Time zone and date setting in the setup menu to set the date and time.

CThe Clock Battery

•The camera’s clock is powered by a backup battery that is separate from the camera’s main battery. The backup battery charges when the main battery is inserted into the camera or when the camera is connected to an optional AC adapter, and can provide several days of backup power after about ten hours of charging.

•If the camera’s backup battery becomes exhausted, the date and time setting screen is displayed when the camera is turned on. Set the date and time again. See “Setting Display Language, Date and Time” (step 2, A22) for more information.

and Playback

CImprinting the Shooting Date in Printed Pictures

•Set the date and time before shooting.

•You can permanently imprint the shooting date in pictures as they are taken by setting Print date in the setup menu (A88).

•You can use the ViewNX 2 software (A76) to print the shooting date in pictures that were taken

without using the Print date option. 23