Nikon COOLPIXS100RED, COOLPIXS100PURPLE, COOLPIXS100GOLD, COOLPIXS100BLK manual F13

Troubleshooting

Problem	Cause/Solution	A
	With some PictBridge-compatible printers, the
The PictBridge startup	PictBridge startup screen may not be displayed	90,
	and it may be impossible to print pictures when
screen is not displayed
	Auto is selected for the Charge by computer	E39,
when the camera is
	option in the setup menu. Set the Charge by	E92
connected to a printer.
	computer option to Off and reconnect the
	camera to the printer.
	• Memory card contains no pictures. Replace	18
	the memory card.
Pictures to be printed are	• Remove the memory card to print pictures	18
	from the internal memory.
not displayed.
	• Pictures created in Draw scene mode or	40
	pictures taken in 3D photography scene
	mode cannot be printed.
	Paper size cannot be selected from the camera
	in the following situations, even when printing	E40,
Cannot select paper size	from a PictBridge-compatible printer:
with camera.	• The printer does not support the paper size	E41
	specified by the camera.
	• The printer automatically selects the paper size.
	• When printing pictures taken at an Image	–
	mode setting of l4608×2592 (default
	setting), the edges of pictures may be cropped,
	preventing printing of complete pictures. Refer
Edge of printed picture is	to the documentation included with the		Technical
cropped.	printer or consult the digital photo lab for
	further details to make sure that the printer
	supports printing at an aspect ratio of 16:9.
	• Take pictures at the Image mode setting	62	Notes
	other than l4608×2592.
	When printing panoramas, the entire picture		and
	may not be able to be printed depending on the
Cannot print panoramas.	printer’s settings. Additionally, printing may not	–	Index
	be possible depending on the printer. See the
	documentation included with the printer or
	consult a digital photo lab for details.

F13