Nikon COOLPIXS100PURPLE manual Troubleshooting, Auto info is selected for Photo info, Print date

Troubleshooting

	Problem	Cause/Solution	A
		• Adjust monitor brightness.	88, E83
		• When the internal temperature of the camera	–
		is high, the monitor darkens to reduce heat
	Monitor is hard to read/has	generation. When internal temperature cools,
		the monitor brightens again.
	darkened
		• When the power-on lamp is covered after the	–
		camera has automatically increased monitor
		brightness, the monitor may darken.
		• Monitor is dirty. Clean monitor.	F5
		• If camera clock has not been set, “Date not set”	22, 88
		indicator blinks during shooting and movie
		recording. Pictures and movies recorded
	Date and time of recording	before clock is set are dated “00/00/0000
		00:00” or “01/01/2011 00:00” respectively. Set
	are not correct
		the correct time and date from the Time zone
		and date option in the setup menu.
		• Check camera clock regularly against more	23, 88,
		accurate timepieces and reset as required.	E80
	No indicators displayed in	Auto info is selected for Photo info in	88, E83
	monitor	Monitor settings of the setup menu.
		• Time zone and date setting has not been	22, 88,
	Print date not available	made in the setup menu.	E80
		• Another function that restricts the Print date	64
Technical		option is enabled.
		• Another function that restricts the Print date	64
	Date not imprinted on	option is enabled.
Notes	pictures even when Print	• Selected shooting mode does not support	E84
	date is enabled	• The date cannot be imprinted on movies.	–
		Print date.
and
	Screen for setting date and	Clock battery is exhausted; all settings were
Index	time is displayed when		23
	camera is turned on.	restored to their default values.
	Camera settings reset
	Monitor turns off, and the	Battery temperature is high. Turn off camera and
	power-on lamp blinks green		21
		allow battery to cool down before resuming use.
	rapidly.
		The camera may become hot when shooting
	Camera becomes hot.	movies for an extended period of time or when	–
		the camera is used in a hot area; this is not a
		malfunction.

F8