Nikon COOLPIXS100RED, COOLPIXS100PURPLE, COOLPIXS100GOLD manual Blink Warning, E93, Power-on Lamp

The Setup Menu

CPower-on Lamp

The following chart explains power-on lamp status when the camera is connected to a computer.

Power-on lamp	Description
Blinks slowly	Battery charging.
(orange)
Glows (green)	Battery not charging. Charging is complete when the power-on lamp stops
	blinking orange and glows green.
	• The ambient temperature is not suited to charging. Charge the battery
	indoors with an ambient temperature of 5°C to 35°C (41°F to 95°F).
	• A USB cable is not correctly connected or the battery is faulty. Reconnect
Flickers (orange)	the USB cable correctly or replace the battery.
	• Computer is in sleep mode and does not supply power. Reboot the
	computer.
	• The battery cannot be charged because the computer’s specifications or
	settings do not support power supply to the camera.

Blink Warning

dtab Mz (setup menu) MdBlink warning

Specify whether or not the camera detects human subjects that blink when shooting with face detection (A65) in the following modes.

•G (easy auto) mode (A36) or A (auto) mode (A37).

•Portrait (A42) or Night portrait (A43) is selected for the scene mode.

Option	Description
	When the camera detects that one or more human subjects
	may have blinked in a picture taken using face detection, the
	blink warning screen is displayed in the monitor.
	The face of the human subject that may have blinked when
On	the shutter was released is framed by a yellow border. Should
	this occur, check the picture and determine whether or not
	another picture should be taken.
	See “Operating the Blink Warning Screen” (E94) for more
	information.
Off (default setting)	Blink warning is not enabled.

BNote on Blink Warning

Blink detection does not function at continuous settings of Continuous H, Continuous L, BSS, or

Multi-shot 16.

Reference Section

E93