Nikon COOLPIXS100BLK Turning the Camera On and Off, Turn the Camera On, No operations Performed

Step 1 Turn the Camera On

Turning the Camera On and Off

•When the camera is turned on, the power-on

lamp (green) will light, and then the monitor will turn on (the power-on lamp turns off when the monitor turns on).

•To turn off the camera, close the slide cover. The

power-on lamp and the monitor will turn off.

BNotes on Opening and Closing the Slide Cover

•Be sure to keep your fingers or other objects away from the lens when opening and closing the slide cover.

•The camera turns on before the slide cover is fully open, but shooting is not possible until the cover is fully open.

•When the camera is not in use, close the slide cover completely. Otherwise, power continues to be consumed even when the monitor is off, and the battery runs low.

CPower Saving Function (Auto Off)

Basic Steps for Shooting and Playback

If no operations are performed for a while, the monitor will turn off, the camera will enter standby mode, and the power-on lamp will blink.

While the power-on lamp is blinking, press the shutter-release button to reactivate the monitor.

No operations

performed

1290

Blinking

Camera enters standby mode.

• The time allowed to elapse before the camera enters standby mode can be changed from the Auto off option in the setup menu (A88).

• Camera enters standby mode in about a minute (default setting) during shooting or playback mode.

• When the AC Adapter EH-62G (available separately) is used, a screen saver function is activated to prevent screen burn when no operations are performed for about a minute (default setting).

21