Nikon COOLPIXS100BLK Connecting the Camera to a Printer, Camera is automatically turned on, E39

Connecting the Camera to a Printer

Connecting the Camera to a Printer

1Close the slide cover to turn off the camera.

2Turn on the printer.

• Check printer settings.

3Connect the camera to the printer using the included USB cable.

•Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle, and do not use force when connecting or disconnecting the plugs.

Reference Section

4The camera is automatically turned on.

•When properly connected, the PictBridge startup screen (1) will be displayed in the camera monitor, followed by the print selection screen (2).

1

2 15/11/2011 12 / 12

BIf the PictBridge Startup Screen is not Displayed

Turn the camera off and disconnect the USB cable. Set the Charge by computer option (E92) in the camera’s setup menu to Off and reconnect the cable again.

E39