PART NAMES AND FUNCTIONS
(1) Front Panel POWER button
•This turns the set on and off.
Disc holder
•Place discs in this holder.
Press the OPEN/CLOSE button to open and close the disc holder. Load discs firmly inside the slot.
OPEN/ CLOSE button
•Press this button to open and close the disc holder. The disc holder will not open during playback.
LEVEL control
•Use this to adjust the volume of the headphones.
PHONES jack
•Connect headphones with an impedance of 30 to 40 62/ohms.
STOP button
•Press this button to turn all the servo functions off and stop. Press this button during playback to set the stop mode.
STANBDY / CUE button
•When this button is pressed during the play or pause mode, the pickup returns to the position at which playback started and the standby mode is set. (Back Cue)
•When pressed during playback when the next track has been programmed, the programmed track is searched for and the standby mode is set.
•The button lights when the standby mode is set.
•When the button is pressed while pressing the PLAY MODE button, the preset mode is set.
PLAY / PAUSE button
•Press this button in the standby, pause or manual search mode to begin playback.
•Press the button in the stop mode to search for the first track and begin playback.
•The button lights during the play mode.
•When the button is pressed during playback, the pause mode is set. The button flashes while the pause mode is set.
PROG. PLAY ON/ OFF button
•When this button is pressed while the PROGRAM IN button is lit, the program play mode is set.
•The button will not function during the
•The button lights during the program play standby and play modes.
•When the button is pressed during the program play standby or play mode, the program play mode is cleared.
PROGRAM IN button
•Press this button to set the program input mode.
•The button will not function during the play mode.
•The button flashes when in the program input mode.
•The button lights when a program is set.
Select knob
•Turn this' knob to select the next track (or index number) to be played.
•Use the INDEX button to choose whether to select tracks or index numbers.
•Turn the knob clockwise by one click to move one track (or one index number) forward, counterclockwise by one click to move one track (or one index number) backward.
•When the knob turned while pressing it in, one click corresponds to 10 tracks (or 10 index numbers).
•In the preset mode, use this knob to set and enter preset settings.
•When setting programs, use this knob to select, enter and check the program.
PLAY MODE button
•Press this button to switch the play mode.
PITCH button
•Press this button to switch to the play speed set with the + and
•The button lights when the pitch play mode is set.
•Press the button again to cancel the pitch play mode and return to the normal speed.
+button
•Press this button once to increase the pitch by 0.1 %.
•Hold the button in to increase the pitch continuously.
•Press the button in the program editing mode to set the program insert mode.
-button
•Press this button once to decrease the pitch by 0.1%.
•Hold the button in to decrease the pitch continuously.
•Press the button in the program editing mode to clear the program.
END MON button
•Press this button in the standby mode to monitor the end of the track. (End Monitor)
•The button lights when the end monitor mode is set.
REPEAT button
•Press this button to set the repeat mode.
•The button lights when the repeat mode is set.
•Press the button again to cancel the repeat mode.
A button
•Press this button when no A point is set to set the A point.
•The button lights when the A point is set.
•When pressed while the A point is set, the A point is searched for and the standby mode is set.
•When the button is pressed during manual search while the A point is set, the A point changes.
B button
•Press this button when no B point is set to set the B point.
•The button lights when the B point is set.
•When pressed while the B point is set, the B point is searched for and the standby mode is set.
•When the button is pressed during manual search while the B point is set, the B point changes.
9
