Chapter 2 Content Switching Module with SSL Commands
module csm
module csm
Note
Syntax Description
Defaults
Command Modes
Command History
To allow the association of
The module ContentSwitching Module slot command is the full syntax; the module csm slot command is a valid shortcut.
module csm slot-number
no module csm slot-number
| Slot number where the CSM resides. |
|
|
This command has no default settings.
Global configuration submode
Release | Modification |
CSM release 2.1(1) | This command was introduced. |
|
|
This command was introduced. | |
|
|
Usage Guidelines
Examples
If you want to use the multiple module configuration, you must change the ip slb mode command to rp. An existing CSM configuration is migrated to the new configuration when you change the mode from csm to rp. The default mode is rp, which allows multiple CSM support and allows the Catalyst operating system and Cisco IOS software to run on the same switch.
Migrating from a multiple module configuration to a single module configuration is supported. Migrating the Cisco IOS SLB configuration to the CSM configuration is not supported.
To remove connections to a real server, use the clear module csm X connnection command.
The CSM had its own ARP cache, which was populated with ARP entries through ARP learning. The addition of the arp option allows you to statically configure ARP entries.
This example shows how to configure a CSM:
Related Commands | ip slb mode | ||||
|
| Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference |
|
| |
|
|
| |||
|
|
|
|
|
|
|
|
|
| ||
|
|
|
| ||
