Chapter 2 Content Switching Module with SSL Commands

unidirectional (virtual server submode)

unidirectional (virtual server submode)

To select the traffic type and appropriate timeout value, use the unidirectional command in the SLB virtual server submode.

[no default] unidirectional

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

no

(Optional) Removes the traffic type and timeout values from the

 

configuration.

 

 

default

(Optional) Specifies that the CSM selects the appropriate behavior

 

(unidirectional or bidirectional) based on the protocol.

 

 

The default is default.

 

SLB virtual server configuration submode

Release

Modification

CSM release 2.1(1)

This command was introduced.

 

 

CSM-S release 1.1(1)

This command was introduced.

 

 

The CSM selects the traffic type and the correct timeout behavior for that traffic. The current timeout value can be displayed using the show module csm vserver detail commands.

Examples

This example shows how to select the traffic type and the timeout behavior:

 

Cat6k-2(config-slb-vserver)# default unidirectional

Related Commands show module csm vserver redirect

 

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

2-182

OL-7029-01

Page 204
Image 204
Cisco Systems OL-7029-01 manual Unidirectional virtual server submode, No default unidirectional, Default, 182