Panasonic PT-LB60U manual Direct Input Select buttons pages 27, Shutter button, Default button

(continued from previous page)

1DIRECT INPUT SELECT buttons (pages 27 and 30)

You can select the input signal directly by pushing these buttons (the WIRELESS button is for the PT-LB60NTU only).

2SHUTTER button (page 32)

This button is used to momentarily turn off the picture and sound. You can also select this function from the on-screen menu (refer to page 53).

3DEFAULT button (page 39)

This button is used to reset the projector adjustment values to the factory default settings.

4VOLUME +/- buttons (page 32)

These buttons are used to adjust the volume of the sound that is output from the projector’s built-in speaker and VARIABLE AUDIO OUT connector. Refer to page 52 for details on how to adjust the volume without using the remote control unit.

5DIGITAL ZOOM +/- buttons (page 33)

These buttons are used to enlarge the projected image.

Connector panel
#	$	%	&	' (
	,	+	* )

#SERIAL connector (pages 21, 22, 23 and 70)

This connector is used to connect a personal computer to the projector in order to control the projector externally. (RS-232C compatible)

$PC 1 IN connector (pages 21 and 22)

This connector is used to input RGB signals and YPBPR signals.

16-ENGLISH