Turning on the power
Before turning on the power
1.Ensure that all peripheral devices are connected
properly. | # |
2. Remove the lens cover. | |
& | AC IN socket Connector |
|
$
( $
(
' &
&
'
)
*
#Connectsocket. the accessory power cord to the AC IN
BInsert the connector into the AC IN socket so that the shape of the connector matches the shape of the socket. Then insert the power cord plug into the wall outlet.
BThe POWER button on the projector will illuminate red.
$Press the POWER button.
BThe POWER button on the projector will flash green. After a short period, it will illuminate green, and the startup logo will be displayed. If you would like the startup logo not to be displayed, set “STARTUP LOGO” to “OFF”. (Refer to page 49.)
%Turn on the power of all connected devices.
BStart the play function of a device such as a DVD player.
NOTE:
BA tinkling sound may be heard when the lamp unit is turned on, but this is not a sign of a malfunction.
