
%PC 2 IN/PC 1 OUT connector (pages 21, 22 and 50)
This connector is used to input or output RGB signals and YPBPR signals. Adjust “PC2 SELECT” in the “OPTION” menu to select whether you want input or output with this connector.
&S-VIDEO IN connector (pages 23 and 46)
This connector is used to input signals from
'AUDIO IN
)VIDEO IN connector (page 23)
This connector is used to input video signals from video equipment such as a video deck.
*VARIABLE AUDIO OUT connector (pages 21, 22, and 23)
This connector is used to output the audio signals which are input to the projector. If audio equipment is connected to this connector, no sound will be output from the
+PC 1/2 AUDIO IN connectors (pages 21 and 22)
These connectors are used to input audio signals, and they correspond to the PC 1 IN/PC 2 IN connectors respectively.
,Power input socket (AC IN) (page 26)
The accessory power cord is connected here.
Do not use any power cord other than the accessory power cord.