Tektronix 240 user manual Printing from non-QuickDraw GX-aware applications

AUsing the Phaser 240 GX Driver

Printing from non-QuickDraw GX-aware applications

If you are using non-QuickDraw GX applications with the Phaser 240 GX driver, the Page Setup and Print dialog boxes look similar to the standard LaserWriter 7.1.2 dialog boxes described in Chapter 2. However, unlike the dialog boxes described in Chapter 2, these dialog boxes have no printer-specific options, such as TekColor color corrections. These dialog boxes reflect the selections made in the default desktop printer. You cannot change these printer settings from an application, but you can change them by selecting (highlighting) the default desktop printer and using the Printer Driver Defaults command in the Printing menu. You can also change the default desktop printer before you change printing selections; see page A-8 for instructions.

Changing a desktop printer’s default selections

1.Click to highlight the default desktop printer.

2.From the Printing menu, select Printer Driver Defaults. The following dialog box appears:

3.Make desired printer selections, then click OK.

4.Return to your application.

A-20Phaser 240 Drivers and Utilities