Tektronix 240 Printing a configuration, Choose Download PostScript File from the Utilities menu

BModifying Printer Operations

Printing a configuration page

Note If you are using a Macintosh with QuickDraw GX and System Software 7.5, you can use the Tektronix Phaser 240 GX driver to print a copy of the configuration page. Refer to page A-11 for instructions.

A configuration page is similar to the printer’s startup page, but it also provides details about each available port. Use the files for your computer type.

Macintosh file name	PC file name
LaserWriter Utility and	PRNTCNFG.PS
Configuration Page

Macintosh users

1.Follow the instructions on page 2-13 to decompress the Phaser 240 Utilities.sea archive file on the Macintosh Driver and Printer Utilities diskette to your computer’s hard disk.

2.Select the appropriate printer in the Chooser.

3.Locate the LaserWriter Utility in the folder on your hard disk containing decompressed utility files.

4.Double–click the LaserWriter Utility icon to start the application.

5.Choose Download PostScript File from the Utilities menu.

6.Select the Configuration Page file from the list, then click Open.

7.At the prompt Save PostScript output as: you are asked for a file name for saving printer output. Use either the default name given in the edit box or type a new name. Click Save to send the file to the printer.

B-4Phaser 240 Drivers and Utilities