STEP 3 (SEE DIAGRAM 3)
A.) Attach the Leg Developer (#38) to the bracket on the Front Stabilizer (#42). Secure it with a Socket axle (#44) and Socket Screw (#45). Do not over tighten the Screw. Make sure the Leg Developer is able to swivel.
B.) Insert two Foam Roll Tubes (#39) halfway through the holes on the Leg Developer. Push four Foam Rolls (#37) onto the Tubes from both sided.
C.) Attach a Spring Clip (#34) onto the weight post on the Leg Developer.
D.) Attach the Arm Curl Handle (#54) to the bracket on the Leg Developer. Secure it with a
DIAGRAM 3
7
