Impex MCB-346 manual Assembly Instruction

ASSEMBLY INSTRUCTION

Tools required assembling the machine: Two Adjustable Wrenches and Allen Wrenches

STEP 1 (SEE Diagram 1)

A.) Connect the two Rear Upright Beams (#1) by a Cross Brace (#15) in the Mid-span. Secure them with two M10 x 2 3/8” Hex Bolts (#2), four ∅ ¾” Washers (#3), one Bracket (#7), and two M10 Aircraft Nuts (#4) on each end of the Cross Brace.

B.) Insert the Backrest Adjustment Bar (#10) through a selected hole to obtain desired incline of Backrest.

C.) Insert Right & Left Bar Catches (#13) & (#14) into the selected hole on the Rear Upright Beams to obtain the desired height to hold the weight bar.

DIAGRAM 1

5