STEP 4 | (SEE DIAGRAM 4) | |
A.) | Attach the Backrest Supports (#16) onto both ends of the Pivot on the Main Seat | |
| Support (#52). Place the other end rest against the Backrest Adjustment Bar (#10). | |
B.) | Place the Backrest Board (#18) onto the Backrest Supports. Secure it with four M6 x 1 | |
| 3/8” Hex Bolts (#50) and ∅ ½” Washers (#51). | |
C.) | Place the Seat (#19) onto the bracket on the Main Seat Support (#52). Align the holes | |
| and secure the Seat with four M6 x 1 3/8” Hex Bolts (#50) and ∅ ½” Washers (#51). | |
D.) | Attach the Arm Curl Pad (#23) to the Arm Curl Stand (#22). Secure it with two M8 x ¾” | |
| Hex Bolts (#20) and Ø 5/8” Washers (#21). | |
E.) | Insert the Arm Curl Stand into the opening on the top of the Front Stabilizer (#42). Use | |
| a Lock Knob (#47) to secure it at desired height. | |
DIAGRAM 4
8
