Troubleshooting 8
Sharing the printer on a network
Driver and utility file interactions
If your Phaser 240 printer is shared by other users on a network, using the downloadable utility files to change the printer’s color correction setting, can affect prints made by other users.
If the colors on your prints are not what you expected, ask your system administrator whether a color correction utility file has been downloaded to the printer. You can also print a configuration page (or startup page) to see the printer’s current color correction setting; see page
Note Refer to page
■When you print from a Tektronix driver with any TekColor color correction option (except Use Printer Setting), the driver selection overrides the following selections for prints made from the driver:
■A color correction utility file, if one has been downloaded to the printer.
■The position of the printer’s switches (located inside the rear panel door). Switch 3 down turns off all color corrections. Switch 3 up is Vivid Color, the factory default color correction, if no utility file has been downloaded.
■When you print from a Tektronix driver with the Use Printer Setting option, your images are printed with the color correction setting currently in the printer’s memory:
■A color correction utility file, if one has been downloaded to the printer.
■The position of the printer’s switches (located inside the rear panel door). Switch 3 down turns off all color corrections. Switch 3 up is Vivid Color, the factory default color correction, if no utility file has been downloaded.
Printing Reference |
