Getting Set Up 2

Installing the Phaser 240 driver

1.Make sure that your Macintosh is turned on with System Software version 6.0.7, 7.0 or later installed.

2.Insert the Macintosh Driver and Printer Utilities diskette into the disk drive. When the diskette appears on the desktop, it should be open, showing the icons inside.

3.Drag the Phaser 240 driver icon from the diskette to the closed System Folder icon on your Macintosh hard disk.

System 7.0 and later users: at the alert message, click OK to automatically install the driver in the Extensions folder.

System 6.0.7 users: the driver is installed in the System Folder.

4.System 6.0.7 users: LaserWriter 7.1.2 software is required to use the Tektronix driver with system 6.0.7. If you need this software, do the following steps:

a.Open the Old System Items folder on the Macintosh Driver and Printer Utilities diskette.

b.Drag the Backgrounder V1.3 and PrintMonitor V7.0 from the diskette to the closed System Folder icon on your Macintosh hard disk. At the alert message, click OK to automatically install these items in their proper places.

c.Restart your Macintosh to activate the software.

5.Select Chooser from the Apple menu.

User Manual

2-29

Page 41
Image 41
Tektronix user manual Installing the Phaser 240 driver